Casting powder Giluform 250 – 25 kg
76,20 €Base price 10.09.2026: 76,20 €
Casting powder Giluform 250 – 25 kg.
Casting compound for the hobby field.
A powder which gives, when mixed with water an easy castable slurry for the manufacture of reliefs, figures and models.
Not suitable for load bearing structures!
Special advantages
– Simple processing
– Surface-treatment possible with all
commercial colours
– Not harmful to skin or injurious to
health.
Characteristics
Mixing ratio powder : water 1 kg : 0,4 l
Working time app. 8 min
Solidification point app. 15 min
Surface hardness above 120 N/mm²
Recommendations for use
The casting form, for example a flexible plastic mould, is to be set up in a level position. Next strew the plaster in the above mentioned ratio into the water, allow to soak, stir for approx. 1 min., taking care not to cause air bubbles. In order to mix larger quantities it is advisable to use a mixing machine. Pour the easy flowing mix in a thin stream into the middle of the form until the surface of the form is covered with a bubble free layer. The rest of the mix can be poured more rapidly. Approximately 30 min. after casting the relief or model can be removed from the mould. Place the casting, which is becoming very warm onto wooden lathes until it is completely cooled.
At temperatures of 20-25 °C drying of the castings requires at least 8 days, it may be reduced to 1-2 days if they are stored at temperatures of 40°C. Thereafter the surface of castings may be treated with commercial dispersion or opaque colours.
Useful hints
It is important to use only pure water and clean receptacles.
Do not exceed the working time.
Important: Shipping cost 9.00 EUR / 1 pc.
Reviews
There are no reviews yet.
Be the first to review Casting powder Giluform 250 - 25 kg